In the application of electric forklifts, sometimes very loud noises are generated. You may feel that the sound is only loud, and there is no problem. In fact, the loud noise of electric forklifts reminds everyone that the equipment is likely to have common failures. Repairs must be carried out.
1. The standard parts are loose, the body tower wheel and roller, when the damage is not optimistic, the gap is very large.
2. The gap between the transmission chain and the shaft pin of the chain piece is too large, or the gap between the upper and lower clips of the forklift and the load-bearing beam of the wheel frame is too large.
3. Check the tower wheel, whether the contradictory rolling clearance between the roller and the column is too large. Whether the cooperation gap between the forklift fork and the wheel frame load-bearing beam is too large, this factor causes the electric forklift to generate a lot of noise when it is in use.
There are many reasons for the noise caused by electric forklifts. The staff should drive the electric forklifts into the parking lot facilities to carry out key investigations and search for the reasons, so that the doubts about the loud noise of electric forklifts can be solved from the source.