(1) A driver who has been trained and has a driver's license can drive;
(2) The actual operating staff should wear shoes, hats, clothing and rubber gloves that can be used for safety protection during actual operation;
(3) In the application, attention should be paid to the performance and operating status of mechanical equipment, hydraulic presses, electrical equipment and MOSFET speed regulating motors;
(4) Connect the switch power supply, first turn on the key power switch, select the position of the azimuth power switch, rotate the steering wheel to see if the car rotates normally, and gradually step on the speed change pedal to maintain a reasonable start-up speed;
(5) Pay attention to the working voltage of the ammeter. When the electric forklift is working, if the working voltage of the ammeter is less than 41V, it should stop running immediately, charge the battery or replace the battery with sufficient power;
(6) The load should not exceed the standard value during transportation, the distance and position of the fork of the forklift should be suitable, and the fork of the forklift must be inserted under the goods, so that the goods are jointly distributed on the fork of the forklift to prevent wheel weight;
(7) When the center of gravity of the product is less than or equal to 500mm from the fork arm, the larger load is the rated hoisting weight. If the center of gravity of the product is more than 500mm away from the fork arm, the hoisting weight should be lower than the rated hoisting weight;
(8) After the fork of the forklift is loaded, the gantry should be tilted back to a larger part, the fork arm should be in contact with the goods, and the fork of the forklift should be raised up and down 200mm away from the ground before driving;
(9) It is strictly forbidden to stand under the fork of the forklift, and it is strictly forbidden to stand on the fork of the forklift;
(10) When the goods are lifted and lowered, the acceleration is not suitable for too fast;
(11) It is forbidden to control the vehicle and accessories from the seat other than the driver's seat;
(12) When the gantry is extended forward and backward to the limit or the fork lift of the forklift reaches a relatively large relative height, be sure to let the rocker quickly return to the middle position