1. The forklift driver should pay attention to the battery capacity of the electric forklift's display board before starting the electric forklift or charging the battery each time. The rechargeable battery is charged when there is 20% of the power consumption, and it is not necessary to wait for all the power consumption. Charge after use. Once the battery power consumption of the forklift truck is used as much as possible, it cannot even be adjusted to the battery charging area. On the other hand, running out of electricity will have a certain harm to the service life of the battery. Do not look at the electricity meter of the electric forklift. Regardless of whether the electric forklift has electricity or not, it is not advisable to charge the battery. This method is also not advisable. The battery charging frequency of the forklift battery under normal conditions is about 1400 times, and the battery charging will be reduced immediately. battery life.
2. The surface of the rechargeable battery or the junction must be kept clean and dry. If there is dust or residue, try to clean it with a damp towel or anti-static cloth, otherwise it will cause a short-circuit fault to explode and become popular, and it will also cause the conductive rod and the connecting strip to corrode and destroy the battery.
3. Please make sure that the forklift battery is compatible with the forklift charger before charging the battery. It is not that the paired charging will seriously endanger the battery life or destroy the rechargeable battery at the same time.
4. The wiring power plug of the charging head should be as timely as possible. When the forklift battery is to be quickly charged, the wiring power plug of the mobile phone charger and the power plug of the rechargeable battery must be inserted in time. If the power plug of the rechargeable battery is not inserted in time, its surface will be very small, which will cause a very large resistor. Large resistors are very easy to cause ignition.
5. When the battery of the forklift truck is being charged, but the rechargeable battery must be used before it is fully charged, the power supply switch must be turned off first, otherwise the power consumption will flow back and it will be very easy to burn the temperature control switch of the charging head.